Shanny SN600C-RT Radio enabled Speedlite Flash for Canon Price in Bangladesh
Shanny SN600C-RT is the current flagship Shanny flash, and basically a near perfect clone of the Canon 600EX-RT speedlite. SN600C-RT is a Speedlite with Canon RT compatible Radio Slave Mode. SN600C-RT is built on the same flash body and hardware as the original Shanny SN600SC with an addition of build-in 2.4GHz RT radio receiver and USB port for firmware updates.
Shanny SN600C-RT supports HSS (high-speed sync), 1st and 2nd curtain synchronization modes and has a high guide number of 60(ISO100, 200mm). For on-camera use, it provides nearly all of the functions of a Canon 600EX-RT, though for a small fraction of the price.
If you are looking for a great value flash for on camera work then the Shanny SN600C-RT is definitely one to consider. SN600C-RT flash is great for the money. When you factor in the price then it’s an absolute bargain. Shanny SN600C-RT is very impressive for the remarkably low price compared to the Canon 600EX-RT. The power can really match the Canon flash, and recycle is even faster. HSS provides more light than the 600EX-RT flash, and the SN600C-RT can even outperform the 600EX-RT in shots before heat protection cut in.
Shanny SN600C-RT is fully compatible with Canon E-TTL / E-TTL II metering. It features a powerful guide number of 60m (ISO 100, 200mm) as well as an impressive zoom range of 20-200mm, along with a wide-angle diffuser for 14mm coverage on full-frame cameras. Bounce lighting is also possible with tilt from -7 to 90° and rotation left and right 180°. The SN600C-RT TTL exposures are very good and quite consistent, bounced or direct. Flash Expsoure Compensation (FEC) adjustments are working as they should
SN600C-RT has a recycle time of about 1.8 seconds and has high-speed sync, 1st and 2nd curtain synchronization settings. Also, it supports a multi flash stroboscopic mode for multiple flashes during a single exposure. It runs on 4 AA batteries and comes with a mini stand and diffuser cover.
The build quality of the SN600C-RT (and all similar Shanny flashes) appears really excellent. The case is almost identical to the Canon 600EX-RT, though you can notice that the plastic is just a little bit less refined, and the main dial and buttons just a little harder to operate, which is still much better than you would expect from the speedlite flash of this price tag.
The SN600C-RT (and similar Shanny flashes) are still quite clearly matching the Canon 600EX-RT for light output though. So the Shanny flashes can really match the Canon 600EX-RT for power, where many other third party flashes are at at least 1/3 of a stop bellow.
Shanny SN600C-RT FEATURES
Shanny SN600C-RT level lock clamping foot clamps tightly in the camera hot-shoe, and does not allow the flash to slop around any more than the original Canon flash does.
RT compatible slave unit – Built-in RT receiver so it can work as a slave unit to the Canon RT master (ST-E3-RT or 600EX-RT). RT master mode is not supported
Interface and LCD screen display very similar to the original Canon 600EX-RT
PC sync port for wired off-camera firing
Radio transmission has access to 16 channels and 5 groups (A/B/C/D/E)
Built-in pull-out bounce card for reflecting light forward when the flash is tilted upwards
Manual power settings from 1/1 to 1/128 with 29 total levels
Stroboscopic mode of 1-199 Hz for 1-199 flashes
Power saving mode and overheat protection
Automatic setting saving remembers your last settings
Autofocus assist beam to help camera focus in low light conditions.
SN600C-RT has a very high Guide Number of 60m (ISO100, 200mm). It supports High-speed Synchronization, e-TTL and manual flash modes. The highest synchronization speed is 1/8000s.
Fast Clamping Metal Foot with Locking Pin
Supports S1 and S2 pre flash cancel modes.
SN600C-RT supports auto and manual zooming, the flash coverage can be changed between AUTO, 20~200mm.
Ultrafast charging recycle system. Also supports external power supply
Equipped with big size LCD display
Shanny SN600C-RT SPECIFICATIONS
Sync mode
HSS, 1st curtain sync, 2nd curtain sync
Guide Number
60 meters (ISO 100, 200mm)
Flash mode
e-TTL, Manual, MULTI
Optic wireless mode
S1 and S2 basic optic slave modes
Built-in slave function
2.4GHz RT Radio system (compatible with Canon RT system)
4×AA size batteries (Alkaline or Ni-MH are supported)
Multiple flash groups
A/B/C/D/E flash groups
Radio transmission distance
Up to 30m
Recycle time
from 1.8 seconds with fully charged batteries
Color temperature
5600k
Flash duration
1/200s~1/20000s
Flash control
8 levels of output control (1/128~1/1), 29 levels of fine tuning
External interface
hot shoe, PC sync port, external battery port, USB port for firmware upgrades
Additional features
High-Speed sync, Second-curtain sync, FEC, FEB, FEL, manual zoom, auto zoom, sound prompt, custom settings, automatically saving setting, PC port, power saving mode and over heat protection, large clear dot matrix LCD screen, LCD back light can be kept on
Dimensions
79.7 x 142.9 x 125.4 mm
Net weight
14.81 oz / 420 g (without batteries)
Shanny SN600C-RT – COMPATIBLE WITH:
Shanny SN600C-RT is compatible with all Canon EOS cameras (e-TTL II autoflash): Canon 1Dx, 1Ds series, 1D series, 5DIII, 5Ds, 5Dsr, 6D, 7D mark II, 5DII, 5D, 7D, 70D, 60D, 50D, 40D, 30D, 20D, 700D, 650D/T4i, 600D/T3i, 550D/T2i, 500D/T1i, 450D/Xsi, 400D/Xti, 350D, 100D, 1100D, 750D, 760D, 1200D and other Canon EOS cameras
Shanny SN600C-RT is fully compatible with genuine Canon RT equipment: ST-E3-RT transmitter and Canon 600EX-RT speedlite.
Shanny SN600C-RT is only partially compatible with Yongnuo YN-E3-RT and YN600EX-RT units.
