-64%
,

Cactus RF60X Highly Professional High-Speed Sync Wireless Flash with V6 II Wireless Transceiver Combo Pack – Black

Availability:

Out of stock


  • Built-In 2.4 GHz Radio Transceiver
  • Guide Number: 183′ at ISO 100 and 105mm
  • Zoom Range: 24-105mm (18mm with Panel)
  • Wireless Functionality with 328′ Range
  • Settings Can Be Adjusted Remotely
  • Tilts up 90° & Rotates 270°
  • Manual Power: 1/1 to 1/128 in 1/3 Steps
  • Recycle Time: 0.1-1.9 Seconds
  • Strobe & High Speed Sync Sympathy Modes
  • Cooling Mode & AF Assist Light
  • Combination Transmitter and Receiver
  • Remote Manual Power and Zoom Control
  • Supports Many Flash and Camera Brands
  • Frequency: 2.4 GHz

7,990৳  22,000৳ 

Out of stock

RF60x Wireless Flash Overview

Improving upon its predecessor, the RF60x Wireless Flash from Cactus implements a new cooling mode, the ability to quick recharge at full power in just 1.9 seconds, an AF assist light in sync with other Cactus devices, and automatic wireless high-speed sync support in slave mode. The RF60x main selling point is still a built-in radio transceiver with a 328′ range that is fully compatible with the Cactus V6 system and high-powered with a guide number of 183′ at ISO 100 and 105mm. The flash is fully manual and has a zoom range of 24-105mm that can be expanded to 18mm with the built-in wide-angle diffuser panel. The unit also has the ability to act as either a wireless slave or master and can have its setting changed remotely via another unit or a V6 radio trigger.

The RF60x offers numerous other features for convenience, including the ability to tilt up 90° and rotate 270°. The power can be adjusted from 1/1 to 1/128 in 1/3 EV steps and it will recycle in about 0.1-1.9 seconds, depending on power and batteries. Specialized shooting modes are available, including strobe and high speed sync sympathy mode. Additionally, it runs on four AA batteries and comes with both a carrying case and stand.

Cooling mode prevents RF60x from overheating
2.4 GHz wireless transceiver with 16 channels and three modes; local, master, and slave
Wireless range of about 328′ and full compatibility with V6 transceiver, including the ability to control power output and zoom range
Four groups are available and each group can be renamed to one of the following: KEY, FILL, SPOT, RIM, HAIR, LEFT, RIGHT, BACK, and FRONT
Automatic wireless high-speed sync support while in slave mode for Canon, Fujifilm, Nikon, Olympus, Panasonic, Pentax, and Sony when using the V6II or V6IIs transceiver
Built-in optical sensor features multiple delay settings for ensuring it isn’t triggered by any pre-flashes
Multi-flash mode fires a series of flashes to capture multiple images of a moving subject in a single frame
High speed sync sympathy mode works with the TTL flash mounted on camera to produce even illumination across the frame at shutter speeds up to 1/8000 second
Will provide about 100 flashes at 1/1 power and 2000 at 1/128 power
Quick full-power recharge time of just 1.9 seconds
AF assist light in sync with other Cactus devices, such as the V6II or V6IIs

Able to support numerous brands and types of speedlights and flashes, the Cactus Wireless Flash Transceiver V6 II is a versatile and capable flash trigger that offers added functionality to make remote flash work easier. This model is able to support Canon, Nikon, Fujifilm, Olympus, Panasonic, and Pentax flash systems with ease and uses 2.4 GHz radio communication to trigger other units from up to 328′ away. The main advantage of the V6 II is high-speed sync, of which two modes are offered. A normal setting uses a protocol depending on the camera system involved whereas the Power Sync can boost the flash for moments when Normal HSS is not powerful enough.

Users will be able to set up flashes in one of sixteen channels or three groups. Also, it has a Multi-Master setting that allows multiple shooters to trigger the same flashes, useful for demonstrations or events with a second shooter. By using flash profiles to register specific speedlights, the V6 II gains a few capabilities, such as an Absolute Power Mode, which calculates the equivalent power settings between multiple flashes. Additionally, it has a TTL pass-through hot shoe on the top and offers a 3.5mm sync terminal for plugging into strobes and other lights.

Please note that high speed sync is not supported when using the following cameras:
Fujifilm X-E2
Panasonic DMC-GX8Please note that this item is incompatible with some copies of the following cameras:
Olympus OM-D E-M1

RF60x Wireless Flash

MountShoe
Guide No.183′ / 55.78 m ISO 100 at 105 mm Position
Exposure ControlManual
Vari-PowerManual: 1/1 to 1/128
Bounce HeadYes0 to +90°
Swivel HeadYes, 270°
Coverage18 – 105 mm (Full Frame)
Zoom HeadFull Frame: 24 – 105 mm
Off-Camera Terminal3.5 mm
Recycle TimeApproximately 0.1 to 1.9 Seconds
Flash-Ready IndicatorYes
Slave Timing ModesInstant Sync
Skip Preflash
Wireless OperationMethod: RF
Distance: Up to 328′ / 99.97 m
Wireless Communication Channels16 Channels
Wireless Groups4 Groups
Power Source4 x AA Alkaline, Rechargeable NiMH Batteries
Dimensions (W x H x D)8.1 x 3.3 x 2.4″ / 205.0 x 83.0 x 61.0 mm
Weight13.76 oz / 390 g
Packaging Info
Package Weight1.25 lb
Box Dimensions (LxWxH)9.4 x 3.7 x 2.9″

Wireless Flash Transceiver V6 II

Wireless
Channels16
Groups4
Wireless Range328′ / 100 m
Radio Frequency2.4 GHz
General
Sync Speed1/8000 Sec
Connectivity
Ports1 x 3.5 mm (Flash)
1 x Mini-USB (Power)
Electrical
Battery Type2 x AA
Environmental
Operating Temperature-4 to 122°F / -20 to 50°C
Physical
Dimensions2.8 x 2.8 x 1.7″ / 72 x 72 x 42 mm (Transmitter)
Weight3.4 oz / 96 g
Packaging Info
Package Weight0.45 lb
Box Dimensions (LxWxH)4.8 x 4.1 x 3″

In the Box

  • Cactus RF60x Wireless Flash & V6 II Trigger
  • FC-3 Carrying Case
  • FS-2 Flash Stand

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Cactus RF60X Highly Professional High-Speed Sync Wireless Flash with V6 II Wireless Transceiver Combo Pack – Black”

There are no reviews yet.